The RP40 is a multi-technology card reader designed for customers upgrading their current card system from HID Prox to iCLASS® credentials. With the RP40 reader, the customer has the ability to transition to smart cards over time while incorporating the use of multiple card technologies within a single building or across multiple facilities.

Unlike contactless smart card serial number readers, with the RP40 multiCLASS™ reader, you get enhanced security through mutual authentication and data encryption.

Only the RP40 provides true iCLASS security, the ease of Prox, the power of smart cards and the confidence of choosing HID, the worldwide leader in access control.

• Simple Migration - from the most popular proximity technologies to iCLASS®


• Open Architecture Design - allows project specific formats and keys


• Powerful Options - Provides flexible options for processing multi-technology cards and configuring the reader's audio/visual characteristics


• All HID Card Formats Carryover


• Reads: 125 kHz - HID proximity and AWID, 13.56 MHz - iCLASS, DESFire® - ISO 15693 CSN (MyD, I Code, Tag It), ISO 14443A CSN (MIFARE®) and FeliCa™ CSN


Click the links below for more information:

Ordering Instructions
Data Sheet
Installation Instructions



Select Revision This product is only available in ... Revision C

Select Color Option G - Charcoal Gray K - Black

Select Configuration Setting 00 - Beep on, LED normally red, flashes green on tag read 01 - Beep off, LED normally red, flashes green on tag read 02 - Beep on, LED normally off, flashes green on tag read 03 - Beep off, LED normally off, flashes green on tag read 04 - Beep on, LED normally red, host must flash green 05 - Beep off, LED normally red, host must flash green 06 - Beep on, LED normally off, host must flash red/green 07 - Beep off, LED normally off, host must flash red/green

Select iCLASS Security 0 = Standard 1 = Custom, not valid with FIPS201 options C = Standard with Open Collector Tamper enabled D = Custom with Open Collector Tamper enabled

Select Hardware Options N = HID and AWID Module (Pigtail Only) D = Indala Module (Pigtail Only)

Select MIFARE CSN Wiegand Output Mode 0 = 32 bit 1 = 32 bit reverse (Same as 6055A and 6055BXX0011) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Supressed