The bioCLASS products provide three levels of fingerprint verification. During the enrollment process, the RWKLB575 is connected to your PC via a USB port. The software will guide the user to place their finger on the sensor. The fingerprint template is collected at the unit and immediately transferred to the card. During this enrollment process, the fingerprint template is stored ONLY on the card; it is never transmitted to an external host. During verification at the door, the LCD graphical display will assist the user with instructions about finger placement on the biometric sensor.


Benefits of the bioCLASS line include:

• Users can choose the level of security to meets their needs: card and PIN; card and fingerprint; card, PIN, and fingerprint.


• The finger pad at the bottom center of the biometric unit offers ease-of-use for either right or left-handed enrollment.


• The location of the finger pad is compliant with ADA standards.


• The bioCLASS RWKLB575 read/write contactless smart card reader with keypad, LCD display, and fingerprint biometric verification.


• LCD display provides feedback on user finger placement and defines custom menu keys.


• Fingerprint templates are stored on the iCLASS card and not in the reader, resulting in increased security, faster throughput, easier system management, lower costs for the biometric reader and reduced concerns over individual privacy.


• HID's offerings encompass the industry's broadest range of open standard contactless smart card products, available from over 40,000 resellers worldwide.


Click the links below for more information:

Ordering Instructions
Data Sheet
Installation Instructions



Select Color Options This product is only available in ... K = Black

Select Revision This product is only available in ... Revision B

Select Configuration Setting 00 - Beep on, LED normally red, flashes green on tag read 01 - Beep off, LED normally red, flashes green on tag read 02 - Beep on, LED normally off, flashes green on tag read 03 - Beep off, LED normally off, flashes green on tag read 04 - Beep on, LED normally red, host must flash green 05 - Beep off, LED normally red, host must flash green 06 - Beep on, LED normally off, host must flash red/green 07 - Beep off, LED normally off, host must flash red/green

Select iCLASS Security 0 = Standard 1 = Custom, not valid with FIPS201 options C = Standard with Open Collector Tamper enabled D = Custom with Open Collector Tamper enabled

Select Hardware Options T = RS232 4 = RS485(Full-Duplex) M = RS485(Half-Duplex) U = USB B = UART to UART

Select Keypad Configuration Setting Options 00 = Buffer one key, no parity, 4 bit message 09 = Buffer one key, add compliment, 8 bit message (Dorado) 10 = Buffer six keys and add parity 11 = Buffer one key and add parity 14 = Buffer one to five keys (Standard 26 bit output) 19 = Buffer four keys and add parity 20 = Single Key buffering 22 = Local PIN Verify

Select MIFARE CSN Wiegand Output Mode This product is only available in ... 0 = N/A