RP40 multiCLASS Reader
Catalog No. iclass_RP40_(6125)

Select Revision This product is only available in ... Revision C

Select Color Option G - Charcoal Gray K - Black

Select Configuration Setting 00 - Beep on, LED normally red, flashes green on tag read 01 - Beep off, LED normally red, flashes green on tag read 02 - Beep on, LED normally off, flashes green on tag read 03 - Beep off, LED normally off, flashes green on tag read 04 - Beep on, LED normally red, host must flash green 05 - Beep off, LED normally red, host must flash green 06 - Beep on, LED normally off, host must flash red/green 07 - Beep off, LED normally off, host must flash red/green

Select iCLASS Security 0 = Standard 1 = Custom, not valid with FIPS201 options C = Standard with Open Collector Tamper enabled D = Custom with Open Collector Tamper enabled

Select Hardware Options N = HID and AWID Module (Pigtail Only) D = Indala Module (Pigtail Only)

Select MIFARE CSN Wiegand Output Mode 0 = 32 bit 1 = 32 bit reverse (Same as 6055A and 6055BXX0011) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Supressed

iClass RK40 Read Only Contactless Reader with Keypad (6130)
Catalog No. iClass_RK40_(6130)

Select Revision This product is only available in ... Revision C

Select Color Option G - Charcoal Gray K - Black

Select Hardware Options N - Pigtail 18" (0.5 meters) T - Terminal Strip

Select Configuration Setting 00 - Beep on, LED normally red, flashes green on tag read 01 - Beep off, LED normally red, flashes green on tag read 02 - Beep on, LED normally off, flashes green on tag read 03 - Beep off, LED normally off, flashes green on tag read 04 - Beep on, LED normally red, host must flash green 05 - Beep off, LED normally red, host must flash green 06 - Beep on, LED normally off, host must flash red/green 07 - Beep off, LED normally off, host must flash red/green

Select iCLASS Security 0 = Standard 1 = Custom, not valid with FIPS201 options C = Standard with Open Collector Tamper enabled D = Custom with Open Collector Tamper enabled

Select Keypad Configuration Setting Options 00 = Buffer one key, no parity, 4 bit message 09 = Buffer one key, add compliment, 8 bit message (Dorado) 10 = Buffer six keys and add parity 11 = Buffer one key and add parity 14 = Buffer one to five keys (Standard 26 bit output) 19 = Buffer four keys and add parity 20 = Single Key buffering 22 = Local PIN Verify

Select MIFARE CSN Wiegand Output Mode 0 = 32 bit 1 = 32 bit reverse (Same as 6055A and 6055BXX0011) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Supressed

iClass RWK400 Read/Write Contactless Reader with Keyp (6131)
Catalog No. iClass_RWK400_(6131)

Select Revision This product is only available in ... Revision C

Select Color Option G - Charcoal Gray K - Black

Select Configuration Setting 00 - Beep on, LED normally red, flashes green on tag read 01 - Beep off, LED normally red, flashes green on tag read 02 - Beep on, LED normally off, flashes green on tag read 03 - Beep off, LED normally off, flashes green on tag read 04 - Beep on, LED normally red, host must flash green 05 - Beep off, LED normally red, host must flash green 06 - Beep on, LED normally off, host must flash red/green 07 - Beep off, LED normally off, host must flash red/green

Select iCLASS Security 0 = Standard 1 = Custom, not valid with FIPS201 options C = Standard with Open Collector Tamper enabled D = Custom with Open Collector Tamper enabled

Select Hardware Options T = RS232 4 = RS485(Full-Duplex) M = RS485(Half-Duplex) U = USB B = UART to UART

Select Keypad Configuration Setting Options 00 = Buffer one key, no parity, 4 bit message 09 = Buffer one key, add compliment, 8 bit message (Dorado) 10 = Buffer six keys and add parity 11 = Buffer one key and add parity 14 = Buffer one to five keys (Standard 26 bit output) 19 = Buffer four keys and add parity 20 = Single Key buffering 22 = Local PIN Verify

Select MIFARE CSN Wiegand Output Mode 0 = 32 bit 1 = 32 bit reverse (Same as 6055A and 6055BXX0011) 2 = 26 bit 3 = 34 bit 4 = 40 bit 5 = 37 bit 6 = 56 bit Z = CSN Supressed

BIO500 Module 6190
Catalog No. 6190

Select Color Options This product is only available in ... K = Black

Select Revision This product is only available in ... Revision B

Select MIFARE CSN Wiegand Output Mode This product is only available in ... 0 = N/A

Select Hardware Options This product is only available in ... N = None

Select Configuration Setting Options This product is only available in ... 00 = Beep on, LED normally red, reader flashes green on read

Select iCLASS Security This product is only available in ... 0 = N/A

Select Keypad Configuration Setting Options This product is only available in ... 00 = Buffer one key, no parity, 4 bit message

R90 Long Range Reader
Catalog No. iclass_R90_(6150)

Select Color Options This product is only available in ... K = Black

Select Revision This product is only available in ... Revision A

Select Configuration Setting 00 - Beep on, LED normally red, flashes green on tag read 01 - Beep off, LED normally red, flashes green on tag read 02 - Beep on, LED normally off, flashes green on tag read 03 - Beep off, LED normally off, flashes green on tag read 04 - Beep on, LED normally red, host must flash green 05 - Beep off, LED normally red, host must flash green 06 - Beep on, LED normally off, host must flash red/green 07 - Beep off, LED normally off, host must flash red/green

Select iCLASS Security 0 = Standard 1 = Custom, not valid with FIPS201 options C = Standard with Open Collector Tamper enabled D = Custom with Open Collector Tamper enabled

Select MIFARE CSN Wiegand Output Mode This product is only avaiable in ... 0 = CSN option not available

Select Hardware Options This product is only available in ... T = Terminal Strip